VAPOPREX 3GF

Medium pressure steam boiler with three flue passes

  • VAPOPREX 3GF

Medium pressure saturated steam generator, packaged steel structure with pressurised combustion and high energy efficiency. Ready for operation in combination with a jet burner on liquid or gas fuel. Boiler with three flue passes, combustion chamber with cooled end plate sized to ensure low heating loads.

Range consisting of 10 models with useful heat outputs from 1,109 kW to 5,233 kW.


  • Technical Data

    Standard design pressure 12 bars, 15 bars (higher pressure upon request).

    Steam production (at 12 bars) from 1.6 to 7.6 t/h.

    Amply sized evaporating chamber with large heat exchange area for the production of high quality saturated steam.

    The door is hinged to the tube plate; it’s insulated on the inside with a suitable layer of refractory concrete and covers the entire heated surface of the tube plate.

    Heat loss to the surrounding environment is limited by a suitable layer of high-density mineral wool insulation on the boiler body.

    The parts subject to pressure are all welded by qualified and IIS approved personnel, according to EN standards.

    These modern-concept and high-efficiency generators have been designed and developed in compliance with European directive 2014/68/UE (PED) and the most recent national and European standards on pressurised recipients. 

    The water circuit can be inspected through ovalshaped manholes and head holes. 

    Top walkway.

     

    CERTIFICATION

    • CE mark in accordance with the following directives.
    • Pressure Equipment (2014/68/UE)
    • Low Voltage (2014/35/UE)
    • Electromagnetic Compatibility (2014/30/UE)

     

     

    ACCESSORIES AVAILABLE ON REQUEST

    Economiser: a water-flue gas heat exchanger that increases efficiency by up to 6%. Its configuration and position are defined based on customer requirements.

    Ladder and walkway for safe access to the walkable platform on top of the boiler.

    Modulating supply system for optimum water level management in combination with an economiser.

    Air preheater: a flue gas/air heat exchanger to be installed in the flue gas circuit between the boiler and the chimney. This increases thermal efficiency by around 4%. This solution requires an industrial burner with separate fan to be installed upstream of the preheater.

    Burner: brand and type chosen based on customer specifications.

    Perforated burner plate based on customer specifications.

    Second standby supply pump with valves.

    System for automatically draining sludge and dissolved salts that deposit on the bottom.

    Salinity (TDS) control system that measures dissolved salts in the water.

    Cooling tank for sampling boiler water.

    BMS 24H for up to 24 hours’ continuous unsupervised operation.

    BMS 72H for up to 72 hours’ continuous unsupervised operation.

    Second FAIL SAFE minimum level probe.

    FAIL SAFE maximum level probe.

    B.E.C.S. (Boiler Electronic Configurable System): the B.E.C.S. control system consists of a PLC fitted with high performance Touch Panel colour operator interface. The interface can be used to manage operation of the Boiler-Burner-Central Heating System.

    “VRC” condensate collection vessel.

    “VRD” atmospheric degasser.

    “DGST” thermophysical degasser.

    “BDV” drainage cooling tank.

    Water treatment system.

    Steam manifold.

  • Depliant

Related products

Pic
VAPOPREX LVPq
Low pressure steam boiler with three flue passes, two in furnace
Pic
VAPOPREX LVP
Low pressure steam boiler with three flue passes, two in furnace
Pic
VAPOPREX HVP
Medium pressure steam generator with three flue passes, two in furnace
Pic
VP 3G
Medium pressure steam boiler with three flue passes