TOP FAN PLUS

Fan coil unit complying with Machine Direc­tive 89/392 EEC and amendments 91/368 EEC, 93/44 EEC, 93/68 EEC, Low-Voltage Directives 72/23 EEC and Electromagnetic Compatibility Directives EMC 89/36 EEC. The fan coil unit is a terminal for the treat­ment of room air in the summer season (coil supplied with cold water) and in winter (coil supplied with hot water).

These units are su­itable for indoor installation, very compact and amply configurable to meet the requi­rements of highly qualified designers. The costomer or the designer can find version with cabinet and with air intake from bottom (VM-B version) or with frontal air intake and version without cabinet ceiling concealed type with 6 speed fan for a short duct (VN version) or with 3 speed fan.

The careful design of the main components, refined st­yling and the versatility of the product make it suitable for any type of installation in the residential, commercial or industrial context. Installation therefore only requires the elec­trical and hydraulic connections.

Construction characteristics

SUPPORT STRUCTURE: in galvanised sheet metal of suitable thickness. There are slots at the back for fixing the unit.

HEAT EXCHANGE COIL: copper pipe type arranged in staggered rows to in­crease heat exchange and aluminium finning in 3 or 4 rows, locked by me­chanical expansion of the pipes. The manifolds have air vents, water drain holes and housing for the supply water temperature probe. The connections are located on the left side panel (fa­cing the unit). The possibility of turning the coil is provided for.

CONDENSATE TRAY: in thermoplastic material to prevent corrosion, it ena­bles either vertical and horizontal unit installation. The drain hole is present on both sides.

3-speed FAN-MOTOR (versions VM-B VM-F and VN-3V): the electric motor, protected against overloads, has th­ree speeds with running condenser always on, directly coupled to the fans and cushioned by elastic supports. The dual-intake centrifugal fans have long blades in order to obtain high air flow-rates with reduced revolutions.

6-speed FAN-MOTOR (versions VN): the electric motor has 6 speeds one or three of which selectable during instal­lation to adjust flow-rate and head to the system's characteristics and ena­ble a short ducting in line with the pro­duct's characteristics.

AIR FILTER: regenerable simply by wa­shing with water.

For the VM-B version it is provided with a continuous guide in plastic material to facilitate extraction operations.

For the VM-F version it is positioned in the front bottom air inlet grill.

For the VN and VN-3V version it is complete with frame and wire screen.

CABINET (only VM-B and VM-F): partly in epoxy powder coated steel sheet to ensure high protection against corro­sion, and partly in anti-UV thermopla­stic material. In the upper part there are air vents and the door for acces­sing the control panel, both in anti-UV thermoplastic material. The VM-F ver­sion also has a front grill in anti-UV thermoplastic material for the air inlet.