OMNIA LIFE M 26T - 35T

This series of air-to-water heat pumps meets the heating and cooling needs of medium-sized residential and commercial installations. All units are suitable for outdoor installation and can produce water up to 85°C. They can be used with radiant systems, fan coils, radiators, and for the indirect production of domestic hot water (DHW) via an external storage tank (not included).

The units use the ecological refrigerant R290 (GWP: 3) and a DC inverter compressor that modulates the output power. They are supplied with a hydronic kit containing all essential components for quick and safe installation.

They offer high energy efficiency and low sound levels, making them suitable either as a single generator or in combination with other energy sources such as electric heaters or boilers. All units come standard with a DHW storage tank temperature probe (to be installed by the installer) and an outdoor air temperature probe (factory-installed), enabling climate-based control in both heating and cooling modes.

For specific applications, the units can be installed in a cascade configuration with one “MASTER” unit (directly managed by the controller) and up to five “SLAVE” units, which may also have different power outputs. Domestic hot water production is managed by the master unit.

In the event of a failure of a slave unit, the remaining units continue to operate normally.All units are carefully manufactured and individually tested in the factory. 

Installation requires only electrical and hydraulic connections.

MAIN CHARACTERISTICS

Ecological refrigerant R290, with very low GWP (only 3)

Range from 26 to 35 kW, with 3 models (380V)

High efficiency class: A⁺⁺⁺ (35°C) and A⁺⁺ (55°C) - NOTE: mod. 26T A⁺⁺⁺ (35°C) and A⁺⁺⁺ (55°C)

Hot water production up to 85°C (80°C with outdoor air temperature down to -20°C)

Wide operating limits (hot water up to 75°C with outdoor air temperature down to -25°C)

Wi-Fi included (remote control)

USB function: configuration via USB port

Parameter transfer between wired controllers; convenient software upgrade for the unit

High SCOP (up to 4.95) and SEER (up to 5.21)

Low sound power level

Compact dimensions for easier integration into buildings

Cascade control up to 6 units

Finned coil with anti-corrosion treatment

THE CONTROL SYSTEM

User interface with a remote wired controller (2-wire connection, max. 50 m from the unit) with menu in 18 languages

USB function: configuration via USB port, parameter transfer between wired controllers, easy software upgrade

Heating and cooling operation

Domestic hot water production (DHW)

Integration with additional energy sources (boiler or electric heater)

Electric heater for DHW tank

Fast DHW 

Disinfection function (anti-legionella cycle)

Silent mode

Remote ON/OFF via external contact

ECO mode (available only for climatic curve in Zone 1)

Weekly scheduling

Antifreeze protection

Cascade function (up to 6 units: 1 master + 5 slaves)

Management of up to 2 heating zones (1 mixed + 1 direct)

Photovoltaic input and Smart Grid input

Maximum current limitation by parameter (applied to maximum current only)

Remote control of the unit via APP (iOS and Android)

Detailed alarm diagnostics with history