FAN COIL CASSETTE
• 2 versions – for 2 pipes plant and for 4 pipes plant.
• 4 model available for 2 pipes type and 2 model for 4 pipes type.
• New EC motor with low consumptions up to 30% respect to a standard motor.
• Controlled by infrared remote controller (standard) and a wired controller (optional)
• Timer setting.
• Available function : Heating, Cooling, Dehumidification, Automatic.
These units are equipped with drain pump. The height of the drainpipe shall set no more than 750mm (500mm for 400 and 400-4 model), otherwise, it’s necessary to introduce an auxiliary water pump.
INFRARED REMOTE CONTROLLER (Standard)
This controller is very easy to use and all parame- ters are under control. The limit trasmitting distance of this remote controller is 10m.
WIRED CONTROLLER (Optional)
This controller is very easy to use and all parameters are under control. In this case, the panel is fixed to the wall and connected to the unit by a wire.
The following accessories are available for this category:
3-WAY VALVE KIT(obligatory for operation in the cooling mode)
The three-way valve is not only required to control the ambient temperature, but also to block the flow of chilled water to the coil if the level of condensed water in the tray should rise in an abnormal way.
It is obligatory to install this valve if the unit is used for operation in the cooling mode during summer as this stops it from cooling too much during the periods when the fan remains at a standstill, thus preventing the unpleasant formation of condensation on the casing of the machine.
The kit include copper pipe connections and 3-way valve with ON/OFF electrothermic actuator, suitable for 230V power input. The valve is controlled by main board of the unit.
This PVC tray gather and conduct outside condensation on pipe connections and 3-way valve kit (if present).